Highlights from 2023-24 Drill Program* include:

From Bo_RC_12:

• 5.79% WO₃ over 2.0 metres (182-184m)
• 1.12% WO₃ over 4.0 metres (246-250m, within 12m from 82m to 94m of 0.40%)
• 0.78% WO₃ over 12.0 metres (82-94m, within 20m from 82m to 102m of 0.50%)
• 0.50% WO₃ over 20.0 metres (82-102m)

From Bo_RC_11:

• 1.75% WO₃ over 10.0 metres (140-150m, within 38m from 112m to 150m of 0.56%)
• 0.56% WO₃ over 38.0 metres (112-150m)

From Bo_RC_13:

• 0.68% WO₃ over 2.0 metres (208-210m)

From Bo_RC_02:

• 0.63% WO₃ over 16.0 metres (62-78m, within 108m from 26m to 134m of 0.22%)

From Bo_Met_01:

• 0.60% WO₃ over 5.0 metres (60-65m, within 106m from 60m to 166m of 0.21%)
• 0.21% WO₃ over 106.0 metres (60-166m)

From Bo_Met_02a:

• 0.53% WO₃ over 23.0 metres (62-85m)

*As previously reported in the Borralha Technical Report (see below).

Vancouver, British Columbia–(Newsfile Corp. – September 23, 2025) – Allied Critical Metals Inc. (CSE: ACM,OTC:ACMIF) (OTCQB: ACMIF) (FSE: 0VJ0) (‘Allied’ or the ‘Company’), which is focused on its 100% owned past producing Borralha and Vila Verde tungsten projects in northern Portugal, is pleased to announce highlights from its 2023 & 2024 drill program on its 100% owned Borralha Tungsten Project. Although the drill results were included in its current technical report on the Borralha Tungsten Project (the ‘Borralha Technical Report’), the individual drill results were never individually showcased. The Borralha Technical Report is entitled, ‘Technical Report on the Borralha Property, Parish of Salto, District of Vila Real, Portugal’, dated effective July 31, 2024′ which is available under the Company’s profile on SEDAR+ at www.sedarplus.ca.

During Allied’s 2023-2024 Borralha drill program, more than 3,685 meters were drilled in 16 drill holes in the Santa Helena Breccia, as described in the Borralha Technical Report, which includes the following notable intercept highlights in the table below.

Table 1: Highlights of Intercepts from 2023-24 Borralha Drill Program

*Reported intervals are downhole lengths. Estimated true widths were calculated from hole orientation and the interpreted geometry of the mineralized corridors. Estimates may vary locally where geometry changes. Where intervals fall outside the resource block-model domains, the true width is not known and only the downhole length is reported.

Table 2: Drill Hole Collar Locations

The Company has continued its exploration of the Santa Helena Breccia with its 2025 drill program which is also focused on the Santa Helena Breccia (SHB) of Borralha.

‘The company invested approximately $4.1 million in 2023 & 2024 on exploration to further give confidence to investors prior to its public listing,’ Roy Bonnell, CEO & Director, Allied Critical Metals, stated. ‘We are now working to provide an updated version of the Mineral Resource Report for Borralha in Q4 2025, which is expected to include more than approximately 5,700 metres of drill results from this year’s program.’

Allied’s flagship Borralha Tungsten Project, strategically located in northern Portugal, represents one of the most significant undeveloped tungsten deposits in the western world having a potential near-term source of supply outside of the domain of China and Russia. With the NI 43-101 mineral resource estimate of 4.98 Mt @ 0.22% WO₃ (Indicated) and 7.01 Mt @ 0.20% WO₃ (Inferred) previously reported in the Borralha Technical Report, Borralha has the potential to provide a stable and scalable source of tungsten concentrate to Western markets. On September 4, 2025, Allied announced a drill intercept of 12.0 metres @ 4.27% WO₃ including 6.0 metres @ 8.39% WO₃ from 252.00 metres downhole, confirming one of the highest-grade tungsten intercepts reported in Western exploration, especially for high quality wolframite tungsten mineralization.

Technical Information and Quality Assurance/Quality Control (QA/QC)

During the 2023-24 drilling campaign three PQ-size diamond drill holes and thirteen reverse circulation boreholes, totalling 3,685.40 metres of drilling, were completed to their proposed lengths. Minerália was contracted to supervise and manage the drilling program that included three PQ-size diamond drill holes, namely Bo_Met_01, _02 and _ 02a, totalling 490.4 metres of drilling and thirteen reverse circulation drill holes, namely Bo_RC_01 to _13 that totalled 3,195.0 metres of drilling. Diamond drill hole Bo_Met_02 intersected old underground workings and was abandoned and re-drilled nearby as Bo_Met_02a. As of the effective date of this report, the Company has drill tested the SHB with 5,602.95 metres of drilling, infilling historical drill holes and extending exploration towards the southern part of the SHB.

The cores from the two diamond holes, Bo_Met_01 and _ 02a were halved length wise after logging and one-half of the cores were shipped to Wardell Armstrong International Ltd. with offices in Truro, London for metallurgical test work. The other half of drill core was sampled and shipped to the ALS preparatory laboratories in Seville, Spain and later to the ALS certified assay laboratories in Dublin Road, Loughrea, Co., Ireland for multi-element ICP analyses. The later 1-metre reverse circulation drill cuttings were composited into 2-metre samples and direct shipped to the ALS preparatory laboratories in Seville, Spain and later to the ALS certified assay laboratories in Dublin Road, Loughrea, Co., Ireland.

The analytical samples were collected directly from the rig splitter according to a sampling list that documented the metres and sampling sequence for each drill hole. This list also identified which sample should be collected in duplicate as well as which certified reference material (‘CRM’) were to be placed in the numerical sequence. The CRMs were randomly inserted at every 20 samples (5%), and duplicate samples were collected every 20 samples (5%). Thus, there’s an alternating CRM and Duplicate every 10th sample.

The analytical and reject samples are then transported in boxes from the drilling site to the core shed by a designated employee. The analytical samples were stored on labelled palettes for later direct shipping to the ALS preparation laboratories in Seville, Spain. Later, the pulp and reject samples were securely stored in the logging room on the property.

RC samples were prepared by ALS preparation laboratory in Seville, Spain, crushing the sample with up to 70% of the material passing a 2 mm screen, and then each sample was split to 250 g and pulverized with hardened steel to 85% passing a 75 μm screen. Each resultant sub-sample was then direct shipped to their certified assay laboratory Dublin Road, Loughrea, Co., Ireland.

The samples are analyzed by the ME-MS81 ALS method that applies a lithium borate fusion to the sample and the result of this fusion is measured by applying an ICP-MS. It is also applied to the ALS ME-4ACD81 procedure which reports base metals by a 4-acid digestion and later analyzed by an ICP-MS procedure. Any over-limit tungsten values were re-analysed at the same laboratory by a W-XRF15b procedure that uses a lithium borate fusion with an XRF analysis. The analytical results were then securely emailed to the company.

To the best of the Company’s knowledge, no drilling, sampling, recovery, or other factors have been identified that would materially affect the accuracy or reliability of the data referenced herein. As indicated further above, these drilling results and related procedures and technical information were also detailed by an independent qualified person in the Borralha Technical Report which is available under the Company’s profile on SEDAR+ at www.sedarplus.ca.

Qualified Person

The scientific and technical information in this news release has been reviewed and approved by Mr. Vítor Arezes, BSc, MIMMM (QMR) (Membership Nº. 703197, Vice-President Exploration of Allied Critical Metals, who is a Qualified Person for the purposes of National Instrument 43-101 – Standards of Disclosure for Mineral Projects. Mr. Arezes is not independent of Allied Critical Metals Inc. as he is an officer of the Company.

Understanding Tungsten

To understand tungsten, it is critical to understand the difference between wolframite tungsten mineralization and scheelite tungsten mineralization. Scheelite often reports higher grades (0.3%-1.0% WO₃) but is more costly and complex to process, requiring flotation methods with higher capital and operating expenditures and lower recoveries.ⁱ In contrast, wolframite, which is the focus of Allied, can be processed more efficiently using gravity and magnetic separation, resulting in lower costs and higher recoveries, making lower grades (~0.15%-0.25% WO₃) economically viable in wolframite deposits. For example, a wolframite deposit with 0.4% WO₃ over 3 metres can be more profitable than a scheelite deposit with 0.7% WO₃ over the same interval due to lower processing costs and higher recovery rates.ⁱⁱ

In Western exploration drilling, tungsten grades typically range from 0.3% to 1.0% WO₃.ⁱⁱⁱ The cut-off grade for economic viability is generally around 0.1% WO₃, with highly efficient operations able to mine at grades as low as 0.08% WO₃. Skarn deposits, a common deposit type, typically range from 0.34% to 1.4% WO₃, with intercepts of 0.4% WO₃ over 1-5 metres considered very good and 0.7% WO₃ over 1-3 metres considered very high-grade.^iv Intercept lengths can range from 0.6 metres to over 100 metres, with longer intercepts at strong grades generally preferred for economic mining. A result like 0.5% WO₃ over 3 metres is generally considered strong within Western tungsten exploration benchmarks, especially for wolframite tungsten mineralization.^v

It is also important to recognize that China, Russia, and North Korea control approximately 87% of the world’s tungsten supply, using cheap labor and minimal environmental standards in authoritarian regimes. ^vi As a result, production costs and grades in these countries are not comparable to Western projects, which operate under higher labor, ESG, and energy cost structures. Evaluating projects outside these regions provides a realistic benchmark for what grades and intercepts are economically viable while supporting secure, NATO-aligned supply chains.

For Allied, this context is significant. Wolframite tungsten grades, ranging from 0.2% to 1.0% WO₃ are strong global wolframite benchmark values. The Company’s focus on wolframite ensures lower processing costs and higher recoveries, supporting project economics even at lower grades. Allied’s operations in secure jurisdictions align with Western critical mineral needs, avoiding geopolitical risks associated with China and Russia while positioning the Company to benefit from growing tungsten demand across defense, aerospace, and electrification sectors. Allied’s strong grades, low-cost processing advantages, and secure location position it as a strategic and responsible tungsten exploration company, well placed to support robust project economics in a rising-demand market. ^vii

About Allied Critical Metals Inc.

Allied Critical Metals Inc. (CSE: ACM,OTC:ACMIF) (OTCQB: ACMIF) (FSE: 0VJ0) is a Canadian-based mining company focused on the expansion and revitalization of its 100% owned past producing Borralha Tungsten Project and the Vila Verde Tungsten Project in northern Portugal with advantageous wolframite tungsten mineralization. Tungsten has been designated a critical metal by the United States and other western countries, as they are aggressively seeking friendly sources of this unique metal. Currently, China, Russia and North Korea represent approximately 86% of the total global supply and reserves. Tungsten is used in a variety of industries such as defense, automotive, manufacturing, electronics, and energy.

ON BEHALF OF THE BOARD OF DIRECTORS

‘Roy Bonnell’

Roy Bonnell
CEO and Director

The Canadian Stock Exchange does not accept responsibility for the adequacy or accuracy of this release.

Cautionary Statement Regarding Forward-Looking Information

This news release contains ‘forward-looking statements’, including with respect to the use of proceeds. Wherever possible, words such as ‘may’, ‘would’, ‘could’, ‘should’, ‘will’, ‘anticipate’, ‘believe’, ‘plan’, ‘expect’, ‘intend’, ‘estimate’, ‘potential for’ and similar expressions have been used to identify these forward-looking statements. These forward-looking statements reflect the current expectations of the Company’s management for future growth, results of operations, performance and business prospects and opportunities and involve significant known and unknown risks, uncertainties and assumptions, including, without limitation, those listed in the Company’s Listing Statement and other filings made by the Company with the Canadian securities regulatory authorities (which may be viewed under the Company’s profile at www.sedarplus.ca). Examples of forward-looking statements in this news release include, but are not limited to, statements regarding the proposed timeline and use of proceeds for exploration and development of the Company’s mineral projects as described in the Company’s Listing Statement, news releases, and corporate presentations. Should one or more of these risks or uncertainties materialize or should assumptions underlying the forward-looking statements prove incorrect, actual results, performance or achievements may vary materially from those expressed or implied by the forward-looking statements contained in this news release. These factors should be considered carefully, and prospective investors should not place undue reliance on the forward-looking statements. This list is not exhaustive of the factors that may affect any of the Company’s forward-looking statements and reference should also be made to the Company’s Listing Statement dated April 23, 2025 and news release dated May 16, 2025, and the documents incorporated by reference therein, filed under its SEDAR+ profile at www.sedarplus.ca for a description of additional risk factors. The Company disclaims any intention or obligation to revise forward-looking statements whether as a result of new information, future developments or otherwise, except as required by law.

ⁱ International Tungsten Industry Association (ITIA). (2023). Tungsten: Global industry, markets & outlook. Retrieved from https://www.itia.info

ⁱⁱ International Tungsten Industry Association (ITIA). (2023). Tungsten: Global industry, markets & outlook. Retrieved from https://www.itia.info

ⁱⁱⁱ US Geological Survey (USGS). (2024). Mineral commodity summaries: Tungsten. Retrieved from https://pubs.usgs.gov/periodicals/mcs2024/mcs2024-tungsten.pdf

^iv British Geological Survey (BGS). (2023). Tungsten fact sheet. Retrieved from https://www.bgs.ac.uk/downloads/start.cfm?id=1408

^v Argus Media Group. (2025). Argus Tungsten Monthly Outlook. Issue 26-6, 11 June 2025. https://argusmedia.com

^vi International Tungsten Industry Association (ITIA). (2023). Tungsten: Global industry, markets & outlook. Retrieved from https://www.itia.info

^vii International Tungsten Industry Association (ITIA). (2023). Tungsten: Global industry, markets & outlook. Retrieved from https://www.itia.info

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/267656

Questcorp Mining Inc. (CSE: QQQ,OTC:QQCMF) (OTCQB: QQCMF) (FSE: D910) (the ‘Company’ or ‘Questcorp’) is pleased to announce that it’s Maiden drilling program at the La Union gold and silver Project in Sonora, Mexico, is progressing on track and on budget, with three of the five main targets now having some initial drilling and work continuing toward completion of the current program. This update follows the Company’s August 6, 2025 announcement marking the start of the program and August 19 and September 10 news releases chronicling the progress of the program.

Saf Dhillon, President and Chief Executive Officer, states: ‘The maiden drill program has been indicating consistency with past mining, and targets are progressing with positive exploration drilling so far. The drilling is intersecting more quartzite than expected which is favorable for fracture-controlled mineralization. The property Operator, Riverside operations team is handling the current exploration program working with the local rancher and the drilling company to efficiently complete the first phase of this exploration program.’

The first hole at the Union Mine target was drilled southeast beneath historic workings, cutting through the Clemente and Caborca formations-both key host units for past mining at Union as described in the filed NI 43-101 report on SEDAR+ by Questcorp Mining (https://www.sedarplus.ca/csa-party/records/document.html?id=48299afdea2a73385e0513ce830753e11ddf957ee61888b81d46e76fa281ac17).

The hole ended in the Caborca Formation, encountering the distinctive microconglomeratic carbonate unit that historically hosted mineralization at the bottom of the Union Mine. Samples from this hole have been delivered to Bureau Veritas in Hermosillo, Sonora, for gold fire assay, with pulps to be sent to Vancouver, Canada, for ICP-MS analysis with 4-acid digestion to determine silver, base metal, and multi-element values. This consistent analytical approach has been applied since the outset of the Union program to ensure comparability across results.

Drilling then moved to the northern part of the project, testing two target areas: the El Cobre Mine area and the North Union Mine area. Here, holes were oriented perpendicular to stratigraphy and toward interpreted feeder zones along pre-mineral fault structures, primarily within the Clemente Formation. Drilling in these areas has intersected more quartzite than initially modeled, with extensive hematitic oxides-an encouraging sign for potential gold mineralization, possibly linked to sulfides that have been oxidized through supergene weathering. Historic mining in the district targeted oxides only, leaving sulfide zones untested. Riverside plans to evaluate this potential beneath past workings across four target areas: Union Mine, El Cobre, North Union, and Famosa.

The program has now moved south to the Famosa target, where two initial holes are planned to test beneath and along strike from historic workings toward a steeply west-dipping, north-south-trending fault structure, as well as into host rocks on either side of this major structural feature. Famosa produced gold historically, with reported grades exceeding ½ oz/ton Au in archived records referenced in the NI 43-101 report. The Company is encouraged by the target’s potential and is eager to advance drilling here.

Once this initial campaign is completed, follow-up work will integrate assay results, ongoing surface programs, additional induced polarization (IP) surveys, and refined geological interpretations based on stratigraphy and structure observed in drilling. The greater-than-expected quartzite content in the Clemente Formation supports the evolving model of fracture- and quartz-pyrite veinlet-hosted gold mineralization, which will help sharpen targeting at the Union Project. Core from all drilling has been logged, saw-cut, and half-core samples sent for assay, with remaining halves retained for reference and cataloging.

The Company looks forward to completing the Famosa drilling, receiving the pending assay results, and providing further updates as this program progresses.

Figure 1. Geologic map with the tenure of the Union internal concession shown in pink. Manto and chimney type CRD targets are shown as red polygons. Riverside now controls all mineral tenures on this map. The drill program will focus on the Union Mine and areas north of the Union Mine with the initial drill work.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/10197/267723_25b092fc440cbaba_001full.jpg

Figure 2. Cross section looking west with conceptual drill targets and schematic drillhole traces. Assays from Riverside’s sampling of rock dump materials from the two mine areas are labeled in black. Red areas are interpreted as manto and chimney target bodies that are now well defined and drill ready. Assays shown on figures 1 and 2 have been previously released and disclosed as summarized below the geochemical QA/QC and in published NI 43-101 Report that Questcorp published 2025 on SEDAR+.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/10197/267723_25b092fc440cbaba_002full.jpg

Qualified Person & QA/QC:

The technical content of this news release has been reviewed and approved by R. Tim Henneberry’, P. Geo (BC) a Director of the Company and a Qualified Person under National Instrument 43-101.

Rock samples from previous exploration programs discussed above at the Project were taken to the Bureau Veritas Laboratories in Hermosillo, Mexico for fire assaying for gold. The rejects remained with Bureau Veritas in Mexico while the pulps were transported to Bureau Veritas laboratory in Vancouver, BC, Canada for 45 element ICP/ES-MS analysis using 4-acid digestion methods. A QA/QC program was implemented as part of the sampling procedures for the exploration program. Standards were randomly inserted into the sample stream prior to being sent to the laboratory.

About Questcorp Mining Inc.

Questcorp Mining is engaged in the business of the acquisition and exploration of mineral properties in North America, with the objective of locating and developing economic precious and base metals properties of merit. The company holds an option to acquire an undivided 100-per-cent interest in and to mineral claims totalling 1,168.09 hectares comprising the North Island copper property, on Vancouver Island, B.C., subject to a royalty obligation. The company also holds an option to acquire an undivided 100-per-cent interest in and to mineral claims totalling 2,520.2 hectares comprising the La Union project located in Sonora, Mexico, subject to a royalty obligation.

Certain statements in this news release are forward-looking statements, which reflect the expectations of management regarding completion of survey work at the North Island Copper project. Forward-looking statements consist of statements that are not purely historical, including any statements regarding beliefs, plans, expectations or intentions regarding the future. Such statements are subject to risks and uncertainties that may cause actual results, performance or developments to differ materially from those contained in the statements. No assurance can be given that any of the events anticipated by the forward-looking statements will occur or, if they do occur, what benefits the Company will obtain from them. Except as required by the securities disclosure laws and regulations applicable to the Company, the Company undertakes no obligation to update these forward-looking statements if management’s beliefs, estimates or opinions, or other factors, should change.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/267723

(TheNewswire)

Vancouver, British Columbia, September 24th, 2025 TheNewswire – Prismo Metals Inc. (the ‘ Company ‘) (CSE: PRIZ,OTC:PMOMF) (OTCQB: PMOMF) is pleased to report that it has received preliminary assay results for the first batch of twenty-three samples taken at its Silver King project located in Arizona. This assay data highlights the different types of mineralization identified in the Company’s news releases of August 28 th and September 15 th 2025 (Figure 1).

‘These assay results confirm the exploration potential at the Silver King project,’ said Dr. Craig Gibson, Chief Exploration Officer. ‘Three samples with silver values reported as greater than 200 g/t were taken from the Silver King mine dump and from the new polymetallic vein recognized in our recent exploration program. Samples with high copper values, that also exhibit important gold values, are largely from the replacement mineralization which is similar to the type of mineralization at the nearby Magma mine.’

Several of the samples have reported values that are greater than the detection limit for the analytical method used. The analytical laboratory must re-analyze these samples by a different method, and the Company is expecting to receive these overlimit assays for silver, copper, lead and zinc within about two weeks. Upon receipt of the over limit assays Prismo will issue a further news release and use this information to help prioritize targets for the further exploration, including the upcoming drilling program. Additional samples, including samples from the Ripsey Mine are currently being analyzed and results are expected in the coming weeks.

‘Much of the focus of the exploration program to date has consisted of a property wide survey of historic mines and prospects surrounding the direct Silver King workings,’ said Gordon Aldcorn, President of Prismo’. ‘ This work has expanded our geological thinking and resulted in the recognition of several new types of mineralization at the project, providing additional targets for exploration. We are presenting the assay results for each of the exploration areas, namely the new mineralized veins (polymetallic and copper), stratigraphically controlled replacement mineralization and the area around the Silver Mine. Each of the areas will be prioritized for further exploration, including drilling.   The initial phase of Prismo exploration on the Silver King project confirmed the exploration potential in several areas. Our upcoming drill program is currently in the permitting stage and is anticipated to be advanced shortly. ‘

Figure 1 . Geologic and land map of the Silver King project showing newly described polymetallic vein in magenta (Ag-Pb-Zn), copper vein in green (Cu-Ag) and stratigraphically controlled replacement mineralization in red.  The strongly altered intrusion with stock work quartz-pyrite veining is indicated by the crosshatch.

New Mineralized Veins (polymetallic and copper veins)

As previously reported in Prismo ‘ s news release of August 28, 2025, the Company geologists identified two previously undescribed veins in the area surrounding the historic glory hole developed on the original exposure of high-grade silver at the Silver King deposit.  The assay results confirm the visual inspection and indicate that there are two distinct veins, one with abundant silver, lead and zinc and the other with copper and silver values.

These veins provide additional exploration targets outside of the area of historic mine workings and may provide information on the controls to mineralization in the pipelike mineralized body.

Table 1. Assay results for selected samples from newly identified veins at the Silver King project.

Stratigraphically Controlled Replacement Mineralization

Several samples were taken along the stratigraphic horizon that hosts replacement and skarn mineralization in numerous small workings. Several samples assayed more than 1% copper and generally contain elevated gold values.

Figure 2. Copper assays for samples taken at the Silver King project.

The m ineralization in this area is similar to that at the Magma mine. It is exposed in several historic mine workings with abundant oxide copper minerals, mainly malachite . These were developed along a northeast dipping limestone horizon near the contact with a quartz diorite intrusion and quartzite . It is located along the same structural and stratigraphic trend of the Magma mine located 0.6 to 1.5 kilometers to the southwest. The largest occurrence, at the Black Diamond mine in the eastern portion of the claim block, was developed on a large outcrop of abundant specular hematite and malachite replacing a limestone bed (Fig. 2) .

Table 2. Assay results for selected samples from the replacement area at the Silver King project.

Figure 3 .  Map showing Silver King project and nearby mineral deposits. The Silver King deposit is located three kilometers from the Resolution Copper deposit (a joint venture between Rio Tinto and BHP) and the high-grade Magma mine, a former copper and silver producer.

Around The Silver King Mine

Two samples were taken of mineralized fragments from the dump around the Silver King workings.  Samples 544514 is composed of selected fragments of quartz vein material with variable amounts of sulfide minerals including stromeyerite (AgCuS), freibergite (CuAgSbS) and base metal sulfides.  Sample 544517 is composed of stockwork veins and breccia with about 50% wall rock fragments.  These two compositions are believed to represent the dominant types of mineralization that will be encountered in and adjacent to the pipelike Silver King mineralized body.

Table 3. Assay results for selected samples from the Silver King mine.

Several additional elements are important in characterizing the different types of mineralization.  The high silver in the Silver King mineralization is associated with gold, copper, lead, zinc and antimony as well as barium and mercury.  The copper replacement mineralization contains important gold along with bismuth.

Figure 4. Silver assays for samples taken at the Silver King project.

Figure 5 . Gold assay values for the Silver King exploration program.

Table 4. Locations for samples mentioned in the text.

Exploration Next Steps

Prismo has submitted a plan of operations for the drill program with the Forest Service. The drill permit is expected by the end of October. A drill program is planned for Silver King, with a minimum of 1,000 meters initially. This first phase of the drill program is designed to test the upper half of the steeply dipping pipelike Silver King mineralized body as well as potentially mineralization adjacent to the dense stockwork that was the focus of historic mining.  Follow up drilling will expand on the initial program based on the results and also include separate targets outside of the historic mining area, such as the polymetallic vein mentioned above. The discovery of the two mineralized veins and porphyry style mineralization has resulted in Prismo evaluating a larger drill program to test those targets.

QA/QC

Samples were analyzed by SGS, an internationally recognized analytical lab, with preparation at the Tempe, Arizona facility and analyses at the Burnaby laboratory.  Prismo inserts controls samples consisting of standard pulps and coarse blanks in the sample stream for QA/QC purposes and also utilizes the labs internal control samples.

Qualified Person

Dr. Craig Gibson, PhD., CPG., a Qualified Person as defined by NI-43-01 regulations and Chief Exploration Officer and a director of the Company, has reviewed and approved the technical disclosures in this news release. The historic data presented in this press release was obtained from public sources, should be considered incomplete and is not qualified under NI 43-101, but is believed to be accurate. The Company has not verified the historical data presented and it cannot be relied upon, and it is being used solely to aid in exploration plans. References to mineralization at the Magma Mine and Resolution Copper deposit is not necessarily indicative to the mineralization on the Silver King property.

About the Silver King

Discovered in 1875, the Silver King mine was one of Arizona ‘ s most important historic producers, yielding nearly 6 million ounces of silver at grades of up to 61 oz/t.  The Silver King mine sits only 3 km from the main shaft of the Resolution Copper project — a joint venture between Rio Tinto and BHP and one of the world ‘ s largest unmined copper deposits with an estimated copper resource of 1.787 billion metric tonnes at an average grade of 1.5% copper (1) . The unique land position is fully surrounded by Resolution Copper ‘ s claim block, offering strategic upside. Selected samples from small-scale production in the late 1990s returned grades as high as 644 oz/t silver (18,250 g/t) and 0.53 oz/t gold (15 g/t), indicating that high-grade mineralization remains.

(1) https://resolutioncopper.com/about-us/

About Prismo Metals Inc.

Prismo (CSE: PRIZ,OTC:PMOMF) is a mining exploration company focused on advancing its Silver King, Ripsey and Hot Breccia projects in Arizona and its Palos Verdes silver project in Mexico.

Please follow @PrismoMetals on , , , Instagram , and

Prismo Metals Inc.

1100 – 1111 Melville St., Vancouver, British Columbia V6E 3V6

Phone: (416) 361-0737

Contact:

Alain Lambert, Chief Executive Officer alain.lambert@prismometals.com

Gordon Aldcorn, President gordon.aldcorn@prismometals.com

Cautionary Note Regarding Forward-Looking Information

This release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as ‘ intends’ or ‘ anticipates’, or variations of such words and phrases or statements that certain actions, events or results ‘ may’, ‘ could’, ‘ should’, ‘ would’ or ‘ occur’. This information and these statements, referred to herein as ‘forward‐looking statements’, are not historical facts, are made as of the date of this news release and include without limitation, statements regarding discussions of future plans, estimates and forecasts and statements as to management’s expectations and intentions with respect to, among other things: the timing, costs and results of drilling at Silver King.

These forward‐looking statements involve numerous risks and uncertainties, and actual results might differ materially from results suggested in any forward-looking statements. These risks and uncertainties include, among other things: delays in obtaining or failure to obtain appropriate funding to finance the exploration program at Silver King.

In making the forward-looking statements in this news release, the Company has applied several material assumptions, including without limitation, that: the ability to raise capital to fund the drilling campaign at Silver King and the timing of such drilling campaign.

Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial outlook that are incorporated by reference herein, except in accordance with applicable securities laws. We seek safe harbor.

Copyright (c) 2025 TheNewswire – All rights reserved.